Fast transition:
Manufacture
MX-100I - Oil product distillation device with a modern control system
oil product distillation device with a modern control system
Oil Product Low-temperature Characteristics Meter MX-700 .
Electric tire inflation station APP-200.
Oil and petroleum products parameters measuring spreadsheets software
New in portable samplers

ПЭ-1620. Portable samplers for oil products

When using any material from this site link www.en.energy1.ru obligatory !

Sampler PE-1640

Application area

Designed for sampling of oil products to determine vapor pressure to control the oil product quality as per GOST 1756-2000.

Clean open containers are used when sampling withdrawn oil material from vats and tank cars. Local tests are recommended, but you can also withdraw the average sample. Before sampling, container must be thoroughly washed by immersing it in the withdrawn product. Then the sample is taken. The container is filled by 70-80%, and closed immediately. Then the container is labeled and transferred to the laboratory. It is important to avoid a loss of light fractions during sampling of volatile crude oil or oil products.

Options

  • PE-1640 Option A - Rope is 5 m with earthening 1.4 m.
  • PE-1640 Option B - Rope is 10 m fixed on wooden bobbin with earthening 1.4 m.
  • PE-1640 (your option) - Any rope length.

Where used

PE-1640 sampler is used by oil refineries, gas stations, tank farms.

Special features

  • Sampler is made of stainless steel alloy 12Х18S10Т, the lid and the bottom of the sampler are manufactured out of BRASS
  • Sampler’s rope is made of stainless steel alloy A2,A4
  • A rope-sampler connection has constant current line
  • Bolts, hooks, latches are made of stainless steel alloy A2,A4
  • Has an earthening cable 1.4 m long with gripe of "Crocodile" type

Specifications

Sampler:

 

Sampler material

Stainless steel alloy 12Х18Н10Т + Brass BS63

Diameter mm.

75

Height mm.

350

Capacity l.

1(fillability 0,8l. - 80%)

Input dimension mm.

24

Rope:

 

Rope material

A2,A4

Earthening length m.

1.4

Rope length m.

5,10, optional

Coil:

 

Coil material

A2,A4

Earthening length m.

1.4

Coil length m.

10, optional

Coil housing material

wood

* It’s possible to design other types of samplers as per Client’s blueprints!

To withdraw sample from determined level

  • Measure the oil product level in the tank (cistern).
  • Make calculations of the sampling levels. (E.g.: up-middle-bottom of 1: 3: 1 for the vertical tank and 1:6:1 for horizontal reservoir from a height of 0.33 of diameter of a rail or a road tank from the bottom internal generant).
  • Measure results on the sampler rope.
  • Close an opening in the sampler lid with fluoroplastic plug.
  • Earthen the metal wire to a tank or a vehicle element.
  • Lower the sampler to a specified level.
  • Holding a rope, shake the sampler abruptly and leave it on a mark for 10 - 15 seconds.
  • After filling, remove the sampler from the tank (cistern), drain the oil product in a storage tank for the preparation of a combined sample.

Price

See price-list

How to order

To buy PE-1640 please contact us by phone or email to clarify the availability and terms of delivery.

Sales :
Sampler PE-1650
3600 руб. 3200 руб.
Просим обратить Ваше внимание на то, что данный сайт носит информационный характер и не является публичной офертой,
определяемой положениями Статьи 437 Гражданского кодекса Российской Федерации.
Для получения детальной информации о стоимости обращайтесь к нашим менеджерам.
 

Яндекс цитирования