Fast transition:
MX-100I - Oil product distillation device with a modern control system
oil product distillation device with a modern control system
Oil Product Low-temperature Characteristics Meter MX-700 .
Electric tire inflation station APP-200.
Oil and petroleum products parameters measuring spreadsheets software
New in portable samplers

ПЭ-1620. Portable samplers for oil products

When using any material from this site link obligatory !

Sampler PM-11 (PE-1620D)

Application area of PM-11

This portable sampler is designed for sampling of oil products as per GOST 2517-12 off road and rail tankers, stationary tanks.
This s
ampler is designed and manufactured as per GOST 2517-12 “Oil and oil products. Methods of sampling”.

Options of PM-11

  • PM-11 Option A - Rope is 5 m with earthening 1.4 m.
  • PM-11 Option B - Rope is 10 m fixed on wooden bobbin with earthening 1.4 m.
  • PM-11 (your option) - Any rope length.

Where PM-11 is used

PM-11 sampler is used by oil refineries, gas stations, tank farms. Sample withdrawing is possible in containers at gas stations through tap for level.

Special features of PM-11

  • The sampler can be opened/closed at any level of depth
  • Sampling can be done even at the bottom level.
  • Produced of brass
  • Sampler’s rope is made of stainless steel alloy A2,A4
  • A rope-sampler connection has constant current line
  • Bolts, hooks, latches are made of stainless steel alloy A2,A4
  • Has an earthening cable 1.4 m long with gripe of "Crocodile" type




Sampler material


Diameter mm.


Height mm.


Capacity l.




Rope material


Earthening length m.


Rope length m.

5,10, optional (double rope)



Coil material


Earthening length m.


Coil length m.

10, optional(double rope)

Coil housing material


To withdraw sample from determined level

  • Measure the oil product level in the tank (cistern).
  • Make calculations of the sampling levels. (E.g.: up-middle-bottom of 1: 3: 1 for the vertical tank and 1:6:1 for horizontal reservoir from a height of 0.33 of diameter of a rail or a road tank from the bottom internal generant).
  • Measure results on the sampler rope.
  • Close an opening in the sampler lid with fluoroplastic plug.
  • Earthen the metal wire to a tank or a vehicle element.
  • Lower the sampler to a specified level.
  • Holding a rope, shake the sampler abruptly and leave it on a mark for 10 - 15 seconds.
  • After filling, remove the sampler from the tank (cistern), drain the oil product in a storage tank for the preparation of a combined sample.

For the bottom samples

  • The bottom sample off a vessel or vehicle is withdrawn as follows:
  • The sampler is lowered to the bottom of the vessel or vehicle.
  • If you touch the bottom the stock rises, and oil product is poured in the crack.
  • The sampler is kept in this position until it is full with a sample, and then it is lifted and poured into the sample receptacle.


See price-list

How to order

To buy PM-11 please contact us by phone or email to clarify the availability and terms of delivery.

* It’s possible to design other types of samplers as per Client’s blueprints!

Sales :
Sampler PE-1650
3600 руб. 3200 руб.
Просим обратить Ваше внимание на то, что данный сайт носит информационный характер и не является публичной офертой,
определяемой положениями Статьи 437 Гражданского кодекса Российской Федерации.
Для получения детальной информации о стоимости обращайтесь к нашим менеджерам.

Яндекс цитирования